Vintage trailer matching the cabinet doors rebuild

Hey y'all, this is a quick video I made to show you how I reproduced the look and feel of the original cabinet doors in our "Ginny the Trailer" project. The issue is that I rebuilt the old closet and because of that I no longer had the correct sized cabinet doors. And much less doors that matched and I really wanted them to match the look and feel of original cabinet doors. And because we faced this problem we figured someone out there might need be having the same difficulties. Anyway, enjoy the show! At the bottom I have put links to the stuff we used.  Thanks!

Trailer video links

Heater:

https://www.amazon.com/Dyna-Glo-BF10PMDG-Liquid-Propane-Heater/dp/B016HUP4OS

Router bits:

https://www.harborfreight.com/carbide-tip-woodworking-router-bit-set-pc-68872.html

7/32” Ply wood:

https://www.homedepot.com/p/Underlayment-Common-7-32-in-x-4-ft-x-8-ft-Actual-0-196-in-x-48-in-x-96-in-431178/203183010

3/8” Plywood:

https://www.homedepot.com/p/Sheathing-Plywood-Common-3-8-in-x-4-ft-x-8-ft-Actual-0-344-in-x-48-in-x-96-in-19837/206821410